Shoei GT-Air II Ubiquity TC-9 Helmet
- In-Stock : We strive to ship all in stock orders within 1-2 business days.
- Pre-Order : If available with our suppliers , the item will arrives to our store usually with in 2-5 buessines days
- Note : If it's show pre-order we recommend Click "Ask a Question" to check stock levels or establish the leadtime.
- Response Time ：Within 30 minutes
- Due to the size of our suppliers catalogues it is just not possible to stock every single part
- We will always do our very best to get your orders to you as fast as possible- because we get it! We know you want your shiny new bike parts as quickly as you get your hands on them, and we will always do our best to ensure this happens.
Guarantee Safe Checkout
Shoei GT-Air II Ubiquity TC-9 Helmet
Shoei have done it again.. They have created a rock solid full face helmet that excels as both a sports helmet and a touring helmet. There’s only one model it can be: the Shoei GT-Air II. This helmet will serve as the successor to the original Shoei GT-Air motorcycle helmet. Shoei have already proven they are very good at improving existing models, we’ve already seen that happen with a few other predecessors made by the Japanese brand.
Stability of the Shoei GT-AIR 2
Aerodynamics are very important to a helmet of this type, that’s why Shoei have put a lot of time into developing a stabile motorcycle helmet. Countless wind tunnel tests have been performed on this helmet to make sure it performs as optimally as possible in the riding wind. We’re also seeing quite a few things which we now already know from other Shoei helmets. The ‘ducktail’ diffuser at the rear of the GT-Air 2 is something that was originally featured on the NXR and the J.O. – it was later added to the Shoei Neotec 2. This ‘diffuser’ provides the helmet with stability in the vacuum area at the rear of the helmet. The GT-Air II is also sporting a larger spoiler than its predecessor. The spoiler’s goal is to keep the helmet straight and comfortable, even at higher speeds in a more sporty riding posture.
Shoei GT-AIR 2 Sunvisor
A sun visor is naturally included and it has received some special attention during the development of the helmet. A section of the inner shell is often sacrificed (less safe!), so that the sun visor can slide into that ‘housing’. Shoei have left the inner shell intact and have created a special fibre expansion in the shell which houses the sun visor. The sun visor itself has the characteristics of a good pair of sunglasses, another unique Shoei trademark. The GT-Air II sun visor is 5mm longer than on its predecessor.
Fit of the Shoei GT-AIR 2
The 3D shaped inner lining ensures a comfortable ‘wrap around the head’ fit, which can even been custom fitted by us with Shoei Personal Fitting. Multiple air intakes on the top and front in combination with an exhaust outtake ensure a pleasant climate in the helmet, without making a noise. Speaking of noise, the Shoei GT-Air II might just be the quietest helmet on the market right now.
Shoei GT-AIR 2 outer shell
The outer shell of the Shoei GT-Air is made up from diverse, specially designed fibre-layers which all have their own function, they call it Advanced Integrated Matrix (AIM). Take a look at the product specifications for all the important details of this tour/sport helmet.
Shoei GT-AIR 2 SRL-2 Communicatiesysteem
The Sena SRL system which we now know from the Shoei Neotec II has received a slight makeover for the GT-Air II. They have created the Sena SRL-2, specially designed to fit exactly in the GT-Air 2. The system is the same as the SRL-1 under the bonnet, only the hardware has been altered so that the system fits perfectly into the helmet’s design – meaning it doesn’t disturb the flow or the aerodynamics.
Outer shell
- AIM multi composite fibre outer shell (fibreglass, aramid, carbon)
- 3 size outer shell (XS-M, L, XL-XXL)
- Integrated spoiler
- Noise reducing Vortex Generator
Safety
- EPS multi density inner shell
- Stainless steel micro ratchet chin strap buckle
- ECE approved
Ventilation
- Multiple ventilation inlets and outlets for maximum airflow and comfort
- Chin and forehead intakes
- Two outlets on the rear to let out warm air
Comfort
- 3D shaped inner lining
- Removable and washable inner lining
- Noise reducing earpads
- Specifically prepared for Sena SRL-2 communication system
Visor
- Thermoplastic aerodynamic ‘curved edge’ CNS-1 visor
- Minimal riding wind impact
- Minimal distortion
- Pinlock anti-fog lens included
- Integrated sun visor with expanded housing
- QSV-2 sun visor with high quality sunglasses characteristics?
Note: All our helmets are purchased directly from Australian supplier and carry the ECE 22.05 or 22.06 standard.
Refund Policy of MOTO RIDENOW PTY LTD
This Refund Policy ("Policy") applies to the following purchases:
https://www.motoridenow.com.au/
1 . General
(a) We offer refunds , repairs and replacements in accordance with the Australian Consumer Law and on the terms set out in this Refund Policy ("Policy").
(b) Any benefits set out in this Policy may apply in addition to consumer's rights under the Australian Consumer Law.
(c) Before making a purchase , please read this Policy so that you can understand your rights and what you can expect from us if you are not satisfied with your order.
2 . Australian Consumer Law
(a) Under the Australian Consumer Law:
(i) Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled
(A) to cancel your service contract with us; and
(B) to a refund for the unused portion, or to compensation for its reduced value.
(ii) You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or a service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.
(b) We offer refunds , repairs , and replacements in accordance with the Australian Consumer Law.
(c) The Australian Consumer Law provides a set of Consumer Guarantees which protect consumers when they buy products and services.
(d) If the Australian Consumer Law applies , then we cannot avoid the Consumer Guarantees which it provides . If there is an inconsistency between this Policy and the Australian Consumer Law, the Australian Consumer Law will prevail.
(e) Further information about the Australian Consumer Law and these Consumer Guarantees is available from the website of the Australian Competition and Consumer Commission.
(f) If a product or service which you purchased from us has a major failure (as defined in the Australian Consumer Law) then you may be entitled to a replacement or refund . You may also be entitled to compensation for any reasonably foreseeable loss or damage resulting from that major failure.
(g) If a product or service which you purchased from us has a failure which does not amount to a major failure (as defined in the Australian Consumer Law) then you may still be entitled to have the goods repaired or replaced.
3 . Cancellation and Change of Mind
(a) In the event that you receive the products or services you have purchased , as stated , but that you simply change your mind , we may, at our discretion , offer you a refund or exchange , provided that:
(i) You notify us within 7 days of receipt.
(ii) In the case of services , the services have not already been performed.
(iii) The following conditions are satisfied:
a) Product has not been used in new condition.
b) Product has not been damaged and with original tags on.
c) Product must be returned with original receipt.
d) Unless required by the provisions of the Australian Consumer Law, electrical goods, helmets, gloves, boots are non-returnable or exchangeable.
e) Unless required by the provisions of the Australian Consumer Law, special orders (eg, exhaust, parts) and back orders are not cancellable.
f) The Purchaser is liable for freight and insurance. In the case of non-faulty returns, a 15% restocking, processing, and inspection fee may apply to the value of the product.
4 . Products Damaged During Delivery
(a) In the event that the product you ordered has been damaged during delivery:
(i) Please contact us as soon as possible.
(ii) Any damaged product must be returned in the condition in which it was received , together with any packaging and other items which you received with the damaged product.
(b) We will arrange to repair or collect the damaged product and replace it with an equivalent product , or to refund it , provided that you have contacted us within 7 days from the date of receiving the product.
5 . Exceptions
(a) Notwithstanding the other provisions of this Policy, we may refuse to provide a repair, replacement or refund for a product or service purchased by you if:
(i) You misused the said product in a way which caused the problem.
(ii) You knew or were made aware of the problem(s) with the product or service before you purchased it.
(iii) You asked for a service to be done in a certain manner, or you asked for alterations to a product , against our advice , or you were unclear about what you wanted.
(iv) Any other exceptions that apply under the Australian Consumer Law.
6 . Shipping Costs for Returns
(a) In the event that a product you have purchased fails to meet one or more Consumer Guarantees under the Australian Consumer Law, we shall bear any cost of shipping the said product (the "Returned Product") back to us , as well as any cost of shipping any replacement product to you.
(b) If the Returned Product can easily be shipped or returned , then you are responsible for organising for the Returned Product to be returned to us. If the Returned Product is eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) then we will reimburse you for the reasonable postage , shipping or transportation costs for the Returned Product.
(c) If the Returned Product is too large , too heavy, or otherwise too difficult to be removed and returned by you , and is believed to be eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) , then we will organise for the postage , shipping , transportation or collection of the Returned Product , at our cost.
(d) In the event that we organise and pay for the inspection , postage , shipping , transportation or collection of a Returned Product , and it turns out not to be eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) , then you will be required to pay the costs of any inspection , postage , shipping , transportation or collection of the Returned Product.
7 . Response Time
(a) We aim to process any requests for repairs , replacements or refunds within 5 days of receipt.
8 . How to Return Products
(a)You can contact us at the end of this Policy to discuss a return using the
information.
(b) Unless otherwise defined in our sole discretion , we shall pay all refunds in the same form as the original purchase or to the same account or credit card used to make the original purchase.
(c) To be eligible for a refund , repair or replacement , you must provide proof of purchase.
(d) You may be required to provide a government issued identification to qualify for a refund , repair or replacement.
9 . Contact Us
(a) If you wish to speak to us about this Policy or about any refund , repairs or replacements , please contact us at: motoridenow@outlook.com.
