Entry-level, race-derived, full-leather jacket for sport street riders
Expanding upon the Argon 2 family (including the one-piece and combi suits) we bring you the Argon 2. An entry-level, race-derived, full-leather jacket for street riders with speed in their DNA.
Good genes
The Argon 2 jacket carries the same race aesthetic as part of the Argon 2 product family. We made a couple of changes to diversify it though. The prints are similar to the one-piece but reversed, additionally the jacket has the same prints as the combi suit. More ergonomic perforation has been added to keep you cool plus the suit is build for high-speed riding, enabling the wearer to take corners at high speeds. How is that achieved? Well, the suit is aggressively pre-shaped and uses the same materials as the Argon 2 racing suit.
Built-in safety
With a AAA CE classification, you know you’re in good hands with the Argon 2 jacket. Furthermore, TPU hard protectors at the shoulders, along with interior armor at the elbows and shoulders come standard - the divided chest protectors and the back protector can also be added at your request.
Fit
Tight fit
The Tight fit is designed to be snug and conform to the rider's body shape. The contouring design ensures that the material and fabrics move with the body, without restricting the range of motion in any situation. This fit is mostly found in base layers and in our race-oriented garments.
Adjustability
Adjustment strap at waist
Pockets
Inner napoleon pocket
Slit pocket at waist
Three inner pockets
Lining
Mesh
Features
Comfort cuffs
Cuff zipper
The zipper at the cuff has several purposes. It allows for easier entry into the sleeve, provides extra ventilation on warm days, and allows you to easily wear the glove cuff under your outer shell and over your base layer.
Jeans loop
The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.
Long connection zipper
Short connection zipper
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
Stretchable cuff
Stretch at armholes
Stretch at inside arms
Stretch at shoulders
Stretch at waist
Insulation
Detachable thermal body warmer
Wind catcher behind cuff zipper
Wind catcher behind front zipper
Behind the front a panel has been installed to block the wind.
Ventilation
Perforation on upper back
Perforation on upper front
Protection
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
Safety seams
The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.
SEEFLEX CE-level 2 Elbow Protectors
Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
SEEFLEX CE-level 2 Shoulder Protectors
Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
TPU protection at shoulder
Outer shell material
Artificial Leather
A synthetic version of leather with a similar look.
buffalo leather
Buffalo is a type of leather that distinguishes itself from cowhide with a more rugged appearance. The finish provides a classical look, allowing it to age beautifully.
Polyester stretch
Visibility
Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.
Wash & Care
Outershell
 |
Do not wash |
 |
Do not bleach |
 |
Do not tumble dry |
 |
Do not iron |
 |
Do not dry clean |
Warnings
| Dry naturally / completely before storing |
| Make sure that your product is completely dry before you store it |
| Refer to the user manual |
| Spot clean with damp cloth |
| Use REV'IT! designated (leather) cleaning agents only |
Removable thermal liner
 |
Machine wash 30°C, mild cycle |
|
Do not bleach |
|
Do not tumble dry |
|
Do not iron |
|
Do not dry clean |
Warnings
Certification
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AAA rating.
Refund Policy of MOTO RIDENOW PTY LTD
This Refund Policy ("Policy") applies to the following purchases:
https://www.motoridenow.com.au/
1 . General
(a) We offer refunds , repairs and replacements in accordance with the Australian Consumer Law and on the terms set out in this Refund Policy ("Policy").
(b) Any benefits set out in this Policy may apply in addition to consumer's rights under the Australian Consumer Law.
(c) Before making a purchase , please read this Policy so that you can understand your rights and what you can expect from us if you are not satisfied with your order.
2 . Australian Consumer Law
(a) Under the Australian Consumer Law:
(i) Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For major failures with the service, you are entitled
(A) to cancel your service contract with us; and
(B) to a refund for the unused portion, or to compensation for its reduced value.
(ii) You are also entitled to choose a refund or replacement for major failures with goods. If a failure with the goods or a service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not done you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service.
(b) We offer refunds , repairs , and replacements in accordance with the Australian Consumer Law.
(c) The Australian Consumer Law provides a set of Consumer Guarantees which protect consumers when they buy products and services.
(d) If the Australian Consumer Law applies , then we cannot avoid the Consumer Guarantees which it provides . If there is an inconsistency between this Policy and the Australian Consumer Law, the Australian Consumer Law will prevail.
(e) Further information about the Australian Consumer Law and these Consumer Guarantees is available from the website of the Australian Competition and Consumer Commission.
(f) If a product or service which you purchased from us has a major failure (as defined in the Australian Consumer Law) then you may be entitled to a replacement or refund . You may also be entitled to compensation for any reasonably foreseeable loss or damage resulting from that major failure.
(g) If a product or service which you purchased from us has a failure which does not amount to a major failure (as defined in the Australian Consumer Law) then you may still be entitled to have the goods repaired or replaced.
3 . Cancellation and Change of Mind
(a) In the event that you receive the products or services you have purchased , as stated , but that you simply change your mind , we may, at our discretion , offer you a refund or exchange , provided that:
(i) You notify us within 7 days of receipt.
(ii) In the case of services , the services have not already been performed.
(iii) The following conditions are satisfied:
a) Product has not been used in new condition.
b) Product has not been damaged and with original tags on.
c) Product must be returned with original receipt.
d) Unless required by the provisions of the Australian Consumer Law, electrical goods, helmets, gloves, boots are non-returnable or exchangeable.
e) Unless required by the provisions of the Australian Consumer Law, special orders (eg, exhaust, parts) and back orders are not cancellable.
f) The Purchaser is liable for freight and insurance. In the case of non-faulty returns, a 15% restocking, processing, and inspection fee may apply to the value of the product.
4 . Products Damaged During Delivery
(a) In the event that the product you ordered has been damaged during delivery:
(i) Please contact us as soon as possible.
(ii) Any damaged product must be returned in the condition in which it was received , together with any packaging and other items which you received with the damaged product.
(b) We will arrange to repair or collect the damaged product and replace it with an equivalent product , or to refund it , provided that you have contacted us within 7 days from the date of receiving the product.
5 . Exceptions
(a) Notwithstanding the other provisions of this Policy, we may refuse to provide a repair, replacement or refund for a product or service purchased by you if:
(i) You misused the said product in a way which caused the problem.
(ii) You knew or were made aware of the problem(s) with the product or service before you purchased it.
(iii) You asked for a service to be done in a certain manner, or you asked for alterations to a product , against our advice , or you were unclear about what you wanted.
(iv) Any other exceptions that apply under the Australian Consumer Law.
6 . Shipping Costs for Returns
(a) In the event that a product you have purchased fails to meet one or more Consumer Guarantees under the Australian Consumer Law, we shall bear any cost of shipping the said product (the "Returned Product") back to us , as well as any cost of shipping any replacement product to you.
(b) If the Returned Product can easily be shipped or returned , then you are responsible for organising for the Returned Product to be returned to us. If the Returned Product is eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) then we will reimburse you for the reasonable postage , shipping or transportation costs for the Returned Product.
(c) If the Returned Product is too large , too heavy, or otherwise too difficult to be removed and returned by you , and is believed to be eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) , then we will organise for the postage , shipping , transportation or collection of the Returned Product , at our cost.
(d) In the event that we organise and pay for the inspection , postage , shipping , transportation or collection of a Returned Product , and it turns out not to be eligible for a repair, replacement or refund under the terms of this Policy (including under the Australian Consumer Law) , then you will be required to pay the costs of any inspection , postage , shipping , transportation or collection of the Returned Product.
7 . Response Time
(a) We aim to process any requests for repairs , replacements or refunds within 5 days of receipt.
8 . How to Return Products
(a)You can contact us at the end of this Policy to discuss a return using the
information.
(b) Unless otherwise defined in our sole discretion , we shall pay all refunds in the same form as the original purchase or to the same account or credit card used to make the original purchase.
(c) To be eligible for a refund , repair or replacement , you must provide proof of purchase.
(d) You may be required to provide a government issued identification to qualify for a refund , repair or replacement.
9 . Contact Us
(a) If you wish to speak to us about this Policy or about any refund , repairs or replacements , please contact us at: motoridenow@outlook.com.
